Department of ELECTRICAL AND ELECTRONICS ENGINEERING
ELECTRICAL MACHINES LAB
S.No | NAME OF THE EQUIPMENT | QUANTITY |
1. | 5 HP, 220V, 1500(RPM), D.C.Shunt motor coupled to 3.7KW, 400V, 50HZ, 1500R.P.M 3PHASE alternator with 3point starter & panel board. | 1 |
2. | 5 HP,220V,1500(RPM), D.C.Shunt motor coupled to 3.7KW,220V,50HZ,1500R.P.M D.C shunt Generator with 3point starter & panel board. | 1 |
3. | 5 HP, 220V, 1500R.P.M, D.C.Shunt motor coupled to 3.7KW, 220V, 50HZ, 1500R.P.M D.C compound Generator with panel board. | 1 |
4. | 5 HP, 220V, 1500(RPM), D.C.Shunt motor mounted on I-channel base with 3-piont starter and brake arrangement with circular spring balances including panel board. | 2 |
5. | 5 HP, 220V, 1500R.P.M, D.C.Compound motor mounted on I-channel base with 4-piont starter and brake arrangement with circular spring balances including panel board. | 1 |
6. | 5 HP, 220V, 1500R.P.M, D.C.Compound motor mounted on I-channel base with 4-piont starter and brake arrangement with circular spring balances including panel board. | 1 |
7. | 5HP, 3 PHASE, 400/415V,50HZ,1400R.P.M Squirrel cage induction motor with brake arrangement and star-delta starter including panel board. | 2 |
8. | 1 phase 50 HZ AUTOTRANSFORMER input
0-230v, output-270 currentrating-20a, including panel board. |
4 |
9. | 1 phase 50HZ, 2KVA, 230/115 transformer (closed type) with terminal brought outside. | 4 |
10. | 3 phase, autotransformer input 0-400v, output 0-470v and current rating -15A. | 2 |
11. | 3 phase, autotransformer input 0-400v, output 0-600v and current rating -15A. | 1 |
12. | 230V, 1 phase resistive loading with 10A feeding capacity in steps of 1A, 2A, 5A with switches. | 2 |
13. | 115V, 1 phase resistive loading with 20A loading capacity in steps of 1A, 2A, 5A with switches. | 2 |
14. | 360ohm’s, 2A, Rheostats (hexagonal type). | 3 |
15. | a) Static Rectifier input voltage 3phase, 360-440V output voltage DC-220V, current rating 100A DCside.
b) Static rectifier -1 phase input voltage -230V, AC output voltage -30V, DC current -5A. |
1 |
16. | 0-3000rpm analog tachometers(0-10,000rpm) | 5 |
17. | 0-150/300V MI type Voltmeter | 6 |
18. | 0-30V/60V MI type Voltmeter | 2 |
19. | 75V/150V-300V, 2.5/5A LPF Wattmeter | 4+3 |
20. | 150/300/600V, 10A/20A UPF Wattmeter | 6+2 |
21. | 0-1A/2A MI type Ammeter | 4+2 |
22. | 0-5A/10A MI type Ammeter | 5 |
23. | 0-10A/20A MI type Ammeter | 6+3 |
24. | 0-30V/60V MC type Voltmeter | 3 |
25. | 0-75V/150V MC type Voltmeter | 3 |
26. | 0-300V MC type Voltmeter | 6 |
27. | 0-5A/10A MC type Ammeter | 6 |
28. | 0-1A/2A MC type Ammeter | 4 |
29. | 0-10A/20A MC type Ammeter | 4 |
30. | Main control panel with Voltmeter and ammeter phase indicators frequency meter on AC side. Voltmeter and ammeter on DC side with MCB. | 1 |
31. | 5 HP ,220V DC Shunt motor coupled to 3-phase,440V,3KW,Alternator provided with starter, field regulator | 1 |
32. | Synchronous motor 5HP, 415V, 3-phase, 50Hz, with brake load pulley belt load | 1 |
33. | 1-phase capacitor start capacitor run Induction motor 2HP,220V | 1 |
34. | 1 phase transformer 50HZ, 3KVA, 220V ,having tapping on 50%,100% | 1 |
35. | 1 phase transformer 50HZ, 3KVA, 220V ,having tapping on 50%,86.6% | 2 |
36. | 5HP, 3 PHASE, 400/415V,50HZ,1440(RPM) Slipring induction motor with brake arrangement and rotor resistance starter including panel board. | 1 |
37. | DC Series motor 5HP 220V 1500(rpm) coupling to series generator | 1 |
38. | 3 phase, autotransformer (closed type) | 1 |
39. | 0-75/150V MI type Voltmeter | 3 |
40. | 0-300/600V MI type Voltmeter | 3 |
41. | 150V,300V,600V, 5/10A LPF Wattmeter | 1 |
42. | Panel board for Synchronous motor with DPST & TPST Switches. | 1 |
43. | Panel board for 1-phase Induction motor with DPST Switch. | 1 |
44. | Panel board for 3-phase Slip ring Induction motor with DPST& TPST Switches. | 1 |
45. | Panel board for 3KVA,1-Phase Transformers 220/220V. | 1 |
46. | Panel board for DC Series motor coupling to series generator with 2-DPST & SPST Switches. | 1 |
47. | Panel board for DC Shunt motor coupling to Alternator DPST & TPST Switches. | 1 |
48. | 0-50,000rpm,Digital tachometer | 3 |
49. | Digital multimeters (mastech) | 3 |
50. | 500 ohm, 1A rheostart | 4 |
51. | 360 ohm, 1.7A rheostart | 1 |
52. | 35 ohm, 5A rheostart | 1 |
53. | 750 ohms,1.2 amp rheostats | 10 |
54. | 300 ohm,1.7 amp rheostats | 4 |
55. | 120 ohm,2 amp rheostats | 5 |
56. | 25 ohm,5 amp rheostat | 2 |
57. | Three phase load rheostat suitable for 415/440v | 2 |
58. | Single phase upf watt meter potential coil 150/300/600v, current coil 2.5/5 amp | 6 |
59. | Single phase upf wattmeter potential coil 150/300/600v, current coil 10/20 amp | 8 |
60. | Single phase lpf watt meter potential coil 150/300/600, current coil 2.5/5 amp | 6 |
61. | Single phase lpf watt meter potential coil 150/300/600v,current coil 5/10 amp | 6 |
62. | Single phase lpf watt meter potential coil 150/300/600v , current coil 10/20 amps | 6 |
63. | Decade capacitance box | 4 |
64. | Single phase air cooled, table/flour mounting type auto transformer | 7 |
65. | Three phase air cooled, table/flour mounting type auto transformer | 2 |
66. | Moving coil DC voltmeter 150/300 v | 15 |
67. | Moving coil DC ammeter 0.2/5 amp | 9 |
68. | Moving coil DC ammeter 5/10amp | 2 |
69. | ||
70. | Moving coil DC ammeter 10/20 amp | 9 |
71. | Moving coi AC ammeter 75/150v | 6 |
72. | Moving coil DC ammeter 5/10 amp | 1 |
73. | Moving coil AC ammeter 5/10amp | 10 |
74. | Moving coil AC ammeter 0/10/20 amp | 10 |
75. | Moving coil AC ammeter 1/2 amp | 7 |
76. | Moving coil AC voltmeter 150/300v | 1 |
CONTROL SYSTEMS LAB
S.NO | EQUIPMENT | QUANTITY |
1 | Transfer function of DC motor | 1 |
2 | Characteristics of synchros | 1 |
3 | PLC | 1 |
4 | Linear system simulator(2nd order system) | 1 |
5 | Effect of P,PD,PI,PID Controller on 2nd order system | 1 |
6 | Simulation of transfer function using op-amp | 1 |
7 | Lag and Lead compensation kit | 1 |
8 | Characteristics of Magnetic Amplifier | 1 |
9 | Characteristics of AC Servomotor | 1 |
10 | PID controller trainer kit with temperature loop | 1 |
11 | 3 ½ digit digital multimeter | 4 |
SOFTWARES | ||
1 | Mat lab | 1 (10 users) |
2 | Simulink | 1(1 user) |
3 | Simpower system Block Set | 1(1 user) |
4 | Control system tool box | 1 |
5 | Signal processing tool box | 1 |
6 | Filer design tool box | 1 |
7 | Image processing tool box | 1 |
8 | Communication tool box | 1 |
9 | Fuzzy logic tool box | 1 |
10 | Neural network tool box | 1 |
ELECTRICAL CIRCUITS LAB
S.NO. | EQUIPMENT | QUANTITY |
1 | Regulated power supply 0-30v/2A,Dual channel | 10 |
2 | CRO (30 MHz) | 11 |
3 | Function generator (10MHz) | 6 |
4 | Bread board with make | 20 |
5 | 3 ½ digit digital multimeters | 6 |
6 | Decade resistance box | 7 |
7 | Servo control voltage stabilizer | 3 |
8 | 1 MHz function generator | 8 |
9 | Regulated DC power supply | 6 |
10 | 20 MHz dual trace oscilloscope | 2 |
11 | Decade inductance box | 7 |
ELECTRICAL MEASUREMENTS LAB
S.NO. | EQUIPMENT | QUANTITY |
1 | Single phase energy meter | 1 |
2 | Dynamo meter power factor meter | 1 |
3 | Crompton DC potentiometer-calibration of PMMC ammeter and volt meter (standard cell, power supply, voltage ratio box(330 V)with galvanometer) | 1 |
4 | Kelvin’s double bridge with (0.01 ohms/5A) | 1 |
5 | Anderson bridge (1 KHZ. Oscillator, head phones) | 1 |
6 | LVDT and capacitance pickup-characteristics | 1 |
7 | Resistance strain gauge-strain measurements | 1 |
8 | Single phase wattmeter | 1 |
9 | Single phase variac | 1 |
10 | Single phase wattmeter 300V/10A LPF | 5 |
11 | Rheostat (29 ohm/4.1A) | 1 |
12 | Schering bridge(1KHZ,oscillator, head phones) | 1 |
13 | Anderson Bridge(1KHZ,oscillator, head phones | 1 |
14 | Crompton DC potentio meter | 1 |
POWER ELECTRONICS LAB
S.NO. | EQUIPMENT | QUANTITY |
1. | Study of characteristics of SCR,TRIAC DIAC,MOSFET&IGBT | 1 |
2. | R & RC firing circuits | 1 |
3. | UJT firing circuits | 1 |
4. | Single phase converter firing circuits using IC | 1 |
5. | Single phase AC voltage controller | 1 |
6. | Single phase converter firing circuit | 1 |
7. | Single phase fully controlled converter power circuit 230V/5A | 1 |
8. | Forced commutation circuits | 1 |
9. | DC Chopper firing circuit | 1 |
10. | DC Chopper power circuit 30V/2A | 1 |
11. | 0-30V/5A DC Regulated power supply | 3 |
12. | Single phase parallel inverter with R & RL load parallel inverter 30V/2A | 1 |
13. | Single phase converter firing unit | 1 |
14. | Single phase half controlled converter power circuit 230V/5A | 1 |
15. | Modified series inverter 30V/2A | 1 |
16. | Single phase Mcmurally bedform inverter with firing circuit 30V/2A | 1 |
17. | Resistive load:-50 ohms/2A | 5 |
18. | Resistive load:-5A in steps of 1A | 3 |
19. | Inductive loads :- 0-50-100-250mH/2A | 5 |
20. | Inductive loads :- 0-50-100mH/5A | 1 |
21. | Single phase dual converter power circuit with firing circuit | 1 |
22. | Single phase parallel inverter power circuit with firing circuit kit | 1 |
23. | IGBT Based Four Quadrant Chopper Drive for PMDC Motor and its controller unit | 1 |
POWER SYSTEMS LAB (EPS)
S.No | NAME OF THE EQUIPMENT | QUANTITY |
1 | Over Voltage Relay (Microprocessor Based)
Relay Rating : 5A / 220V Make : AREVA / JVS Lab-Manuals & Training) |
1 |
2 | Over Voltage Relay (Electromagnetic Type)
Mounted in a panel with internal wiring and test setup. Relay Rating : 220V Make : AREVA / JVS Lab-Manuals & Training |
1 |
3 | Negative Sequence Relay (Static Type)
Mounted in a panel with internal wiring and test setup. Relay Rating : 5A Make : AREVA / JVS Lab-Manuals & Training |
1 |
4 | Fault Analysis simulator for simulating
1. LL Fault 2. LG Fault 3. LLG Fault 4. LLLG Fault 3 phase isolating transformer 6 no Variable Reactors 4 no Variable resistors 2 no over current relays Panel and Wiring with front mounted terminals Lab-Manuals & Training IDMT Over Current Relay (Electromagnetic Type) Mounted in a panel with internal wiring and test setup. Relay Rating : 5A Make : AREVA / JVS Lab-Manuals & Training |
1
|
POWER CONVERTERS LAB (PE & ED)
S.No | NAME OF THE EQUIPMENT | QUANTITY |
1. | Speed measurement and closed loop control using PMDC Motor (With Motor ) | 1 |
2. | Thyristorised drive for PMDC motor with speed measurement and closed loop control(with motor) | 1 |
3. | IGBT used single 4 quadrant chopper drive for PMDC motor with speed measurement and closed loop control (with motor) | 1 |
4. | Thyristorised drive for 1H.P DC motor with closed loop control 1 H.P DC motor with loading arrangements | 1
1 |
5. | 3-phase input thyristorised drive 3 HP DC motor with closed loop control
3 HP DC motor with loading arrangements using PID Controllers |
1
1 |
6. | 3-phase input IGBT 4 quadrant chopper drive for DC motor with closed loop control
1 H.P DC motor with loading arrangements |
1
1
|
7. | Cyclo converter based AC induction motor controller
Isolation transformer ½ HP AC induction motor |
1
1 1 |
8. | Three phase Fully controlled bridge converter with its controller unit | 1 |
9. | Speed Control of 3-Phase Wound Rotor Induction Motor Drive ( without 3-phase Wound Rotor Induction Motor) | 1 |